FASAKRIL Adhesive for EPS PRIME
Polymer and cement-based construction adhesive for bonding thermal insulation EPS panels.
Mix the contents of a 25 kg bag with 6 l of water while constantly mixing with electric mixer until uniform mixture is achieved. Allow the mixture to rest for approximately 10 min and mix again. Apply adhesive along the whole perimeter of the panel, in strips about 5 cm wide, and in the middle, in at least three spots about 15 cm in diameter (40% minimum coverage with adhesive). Bond the panel by pressing it against the prepared surface. Install screw anchors after 3 days, minimum 6 pc/m².