FASAKRIL Adhesive for EPS PRIME WHITE
Construction adhesive based on polymer and high-quality white cement for bonding thermal insulation EPS panels.
Characteristics
Vapour permeable, easy to apply, good adhesive properties.
Application
Mix the contents of a 25 kg bag with 6 l of water while constantly mixing with electric mixer until uniform mixture is achieved. Allow the mixture to rest for approximately 10 min and mix again. Apply adhesive along the whole perimeter of the panel, in strips about 5 cm wide, and in the middle, in at least three spots about 15 cm in diameter (40% minimum coverage with adhesive). Bond the panel by pressing it against the prepared surface. Install screw anchors after 3 days, minimum 6 pc/m².
Curing
2 – 3 days for bonding.
Packaging
25 kg
Consumption
4 – 5 kg/m² for bonding.
Colours
White
Usage
