DURLIN AQUA Radiator enamel
A single component water-based coating intended for anticorrosive protection and decoration of metal radiators, heating pipes, and other heating elements in both interior and exterior settings.
Characteristics
Withstands exposure to elevated temperatures up to 100 °C and does not yellow over time. Quick-drying, odorless and easy to apply
Application
Apply with a brush, roller, or by spraying in 1- 2 coats individually or on a surface previously protected with DURLIN AQUA Metal Primer. After use, clean the tools with water.
Curing
The recommended interval between coats is 4 to 6 hours. In conditions of lower temperature and higher relative humidity, drying time is extended. The coating is fully dry after 24 hours.
Packaging
0.65 l
Consumption
Depending on the application method and type of substrate, 10 – 12 m²/l per coat.
Colours
White
Usage
